Skip to content
A white bath with a mosaic tiled panel against marble-effect wall tiles, with a white towel rail holding pink towels and a white toilet beside it.
Fylde Bathrooms & GM Plumbing

Bathroom Fitting in Blackpool: When to Reseal Round Your Bath

Mould in the sealant round your bath or shower that normal cleaning won't shift is the first sign it needs replacing. Cracks, peeling edges or water pooling where it shouldn't sit mean the same thing.
By Graham
21 Nov 20261 min read

Mould in the sealant round your bath or shower that normal cleaning won't shift is the first sign it needs replacing. Cracks, peeling edges or water pooling where it shouldn't sit mean the same thing.

Don't put it off, especially round a shower tray. A failed seal there can let water through and damage the ceiling directly underneath.

If you're doing it yourself, get every bit of the old sealant off first. The joint needs to be clean and completely dry before anything new goes on. Fill the bath with water before you seal it, so the joint doesn't crack later when the bath is in use. Pick a waterproof, mould resistant sealant that stays flexible, because a bath expands and contracts with use. Then leave it at least a full day before using the bath or shower, as it usually takes one to two days to dry.

Resealing at the first sign of trouble can save you a damaged ceiling in the room below. If your sealant is mouldy, cracked or peeling, or there's a mark on the ceiling under your shower, send me a photo. I work across Blackpool, and you can see more about my bathroom fitting here.

Planning a job like this? Tell us what you need.

Written by

Graham

Owner & Lead Fitter

Experienced bathroom fitter and plumber serving Blackpool and the Fylde Coast. Also trades as GM Plumbing. On Checkatrade.